Product Detail
The Airmar B75C-0-H-MM is a top - notch depth and fast - response water - temperature sensor. With exclusive Xducer ID® technology, it offers 80 kHz of total bandwidth from a single transducer, covering the popular 200 kHz fishing frequency. This broadband transducer is a game - changer for commercial fishermen, charter captains, and tournament anglers. It enables bottom detection down to 3,000m (10,000') with 5 to 10 times greater detail and resolution, allowing you to distinguish between baitfish, game fish, and underwater structures. More sensitive to small targets, it sends back detailed information that shows as crisp, high - resolution images on the echosounder screen. The CHIRP frequency ranges from 130 kHz to 210 kHz, beamwidth from 15° to 9°, element tilt is 0°, deadrise from 0° to 7°, and it can reach a maximum depth of 700ft. Each box includes the B75C - 0 - H - MM transducer, saving you time and money with just one installation.
Using this Airmar transducer is straightforward. First, install the B75C - 0 - H - MM transducer as per the instructions provided. Once installed, connect it to your echosounder. When you're out fishing, the transducer will start working immediately to provide depth and water - temperature information. Remember to keep the transducer clean. After each use, rinse it with fresh water to remove any salt, dirt, or debris. Avoid hitting the transducer against hard objects as it may damage the delicate internal components. Also, make sure the connections are tight and dry. If you notice any issues with the performance, such as unclear images on the echosounder, check the connections and the transducer for any visible damage. With proper use and maintenance, this transducer will serve you well for many fishing trips.
