Ancor 22-18 Gauge - 1/4 Heat Shrink Ring Terminal - 25-Pack [310425]

22-18 Gauge - 1/4" Heat Shrink Ring Terminal - 25-Pack

Wire Range: 22 - 18 AWG
Screw Size: 1/4"
Quantity: 25

Product Features:
These Ancor ring terminals are top - notch! The cross - linked polyolefin tubing is way stronger than PVC and won't burn like it. The heat - activated adhesive lining seals out salt water, oil, acids, and sunlight, and it also reduces strain. The nylon insulator, favored by experts, offers Marine Grade™ resistance to various elements and damage. They're UL Listed and CSA Recognized. With the highest shrink ratio, shrinking to 1/3 of the original size at 257°F/125°C. The operating temperature ranges from 40°C to 110°C. The built - in heat - activated adhesive in the sleeve forms a watertight seal, providing excellent vibration and strain relief. They're tinned for corrosion resistance, made of pure copper for maximum current flow, and have a brazed seam for maximum strength.
WARNING: This product can expose you to chemicals including di(2 - ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Specifications:
Post Size: 1/4"; Package Qty: 25; Heat Shrink: Yes; Type: Ring Terminals; Gauge: 22 - 18 AWG; Box Dimensions: 1"H x 4"W x 4"L, WT: 0.2 lbs; UPC: 091887310757
Quick Guide (pdf)

Using these Ancor heat shrink ring terminals is easy. First, make sure your wire is within the 22 - 18 AWG range. Slide the terminal onto the wire. Then, use a heat source like a heat gun to heat the terminal at around 257°F (125°C). As it heats, the adhesive inside will melt and create a tight seal, and the terminal will shrink to 1/3 of its original size. Be careful when using the heat source to avoid burns. Always work in a well - ventilated area because of the warning about harmful chemicals. For maintenance, keep them in a dry place. If they're exposed to water or harsh chemicals, dry them off as soon as possible to prevent corrosion. Check the terminals periodically for any signs of damage or loosening, especially if they're in a vibrating environment.