BoatLIFE LifeSeal Sealant Cartridge - Black [1171]

LifeSeal® Sealant Cartridge in black is a game - changer for boat owners. It combines marine silicone and polyurethane, specially formulated for fiberglass. This sealant cures fast, has a low odor, and offers high adhesion. It won't sag, corrode, or yellow. It creates a long - lasting, watertight seal for joints that move structurally. You can use it above and below the waterline. Seal decks to hulls, thru - hull fittings, vinyl ports, windshields, and bed marine hardware with it. It adheres well to metal, glass, wood, Lexan®, ABS®, and some other materials. And the best part? You can remove it without harming the gel - coat. But don't use it on ferro cement hulls, impregnated wood, or oil - soaked materials. It cures even in the presence of water, is mildew - resistant, and acid - free.

Using this BoatLIFE LifeSeal Sealant Cartridge is easy. First, make sure the surface is clean and dry. Then, cut the tip of the cartridge at the appropriate size for your job. Apply the sealant evenly on the area you want to seal. For joints subject to movement, make sure to press it well to ensure a good bond. Remember, it can be used both above and below the waterline. But don't use it on ferro cement hulls, impregnated wood, or oil - soaked materials. After application, it will start to cure even in the presence of water. To maintain its effectiveness, keep the sealed areas clean and free from excessive dirt. Since it's mildew - resistant, you don't have to worry too much about mold growth. If you need to remove the sealant in the future, you can do so without damaging the gel - coat.