Airmar B75C-12-L 12d Tilt Low CHIRP Furuno 12-Pin Cable

The Airmar B75C-12-L-12F is a must - have for small boats like center consoles. It combines a depth and fast - response water - temperature sensor. With low - CHIRP technology operating from 40 kHz to 75 kHz and a 32° to 21° beamwidth, it offers great deep - water performance. It has 300 W of power and can reach a maximum depth of 353 m (1200'). Its low - profile, thru - hull housing, made of bronze for fiberglass or wood hulls, provides good display resolution at high speeds when installed properly. It's ideal for stepped, planing, or displacement hulls. The transducer's tilt corrects for hull deadrise when installed almost flush to the hull, ensuring accurate depth readings. Chirp signal processing technology gives more detail at greater depths and is less noisy. The cable length is 9 m (30'), and it has a deadrise range of 8 to 16°. It comes with B75C - 12 - L - MM and an MMC - 12F Cable in the box.

Using the Airmar B75C-12-L is easy. First, install it almost flush to the hull. Make sure to correct the tilt of the element according to the hull deadrise, usually between 8 to 16°. This will help the beam point directly down and get accurate depth readings. When your boat is moving, especially at high speeds, the low - profile design will ensure good display resolution. For maintenance, keep the transducer clean. Check the cable regularly for any signs of wear or damage, as the cable length is 9 m (30'). Avoid using it in extremely harsh conditions that could damage the bronze housing. If you have any issues, refer to the manufacturer's manual or contact customer support.