Airmar B175C-12-H Thru Hull With 8-Pin Garmin MM Cable

The Airmar B175C High Frequency CHIRP Transducer is a must - have for any fishing enthusiast. It features a 12d tilted element and comes with a 1m Garmin 8 - pin M&M Chirp Cable. Model B175 - C - 12 - H - 8G offers high - frequency CHIRP from 130 kHz to 210 kHz, with a beamwidth ranging from 15° to 9°. With a total bandwidth of 80 kHz from one transducer, it's highly efficient. Suitable for fiberglass or wood hulls up to 11 m (36') in size, it has a depth and fast - response water - temperature sensor. The bronze transducer housing ensures durability. Whether you're a commercial fisherman, charter captain, or tournament angler, this transducer can detect the bottom down to 3,000m (10,000') with 5 to 10 times greater detail. One installation delivers up to 80 kHz of total bandwidth, saving you time and money. It terminates with an Airmars Mix and Max connector, which you can cut off if your sounder doesn't need a connector. Specifications include a hull deadrise of 8° to 15°, an acoustic window of urethane, and a frequency range of 130 - 210 kHz. What's in the box? A B175 High Frequency Transducer and a 1m Garmin 8 - pin M&M Chirp Cable.

Using this Airmar transducer is easy. First, make sure your boat's hull is fiberglass or wood and up to 11 m (36') in size. Check the hull deadrise, which should be between 8° and 15°. Install the transducer according to the instructions that come with it. Connect the 1m Garmin 8 - pin M&M Chirp Cable to your sounder. If your sounder doesn't need a connector, you can cut off the Airmars Mix and Max connector at the end of the cable. When using it, enjoy the high - frequency CHIRP from 130 kHz to 210 kHz for great bottom detection. Remember to take care of the bronze housing. Clean it regularly with a mild soap and water solution to keep it in good condition. Avoid hitting the transducer against hard objects, as this could damage it. Store it in a dry place when not in use.