Blue Sea 7545 C-Series Flat Rocker Circuit Breaker - Single Pole - 30A [7545]

Blue Sea 7545 C-Series Single Pole 30A Flat Rocker Circuit Breaker

Great Features:

• The rocker actuator is flush when 'ON', preventing accidental switching.
  
• The colored actuator clearly shows the 'OFF' position.
  
• It offers overcurrent protection for inverters, bow thrusters, and windlasses.
  
• Combines switching and circuit protection in one device.
  
• 'Trip Free' design ensures it can't be held closed after tripping.
  
• Ignition protected, safe for gasoline - powered boats.

Specifications:

• Amperage: 30A AC / 30A DC
  
• Actuator Style: Flat Rocker
  
• Poles: 1
  
• Max Voltage: 240V AC / 48V DC
  
• Circuit Breaker Type: Magnetic Hydraulic - trip free
  
• Terminal Stud Torque: 35 in - lb (3.95 Nm)
• Interrupt Capacity: 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC
  
• Min Operating Temp: - 40°C
  
• Max Operating Temp: 85°C
  
• Mounting Screw: #6 - 32 Stainless Steel
  
• Mounting Screw Torque: 6 in - lb (0.68 Nm)
  
• Switching Cycles: 10000
  
• Terminal Stud: 1/4 - 20 Tin - Plated Brass
  
• Weight: 0.38lb (0.17 kg)

WARNING: This product can expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more info go to P65Warnings.ca.gov.

More Specs:

• Amperage: 30a
• Box Dimensions: 2'H x 3'W x 5'L WT: 0.3 lbs
• UPC: 632085075453

Using this Blue Sea 7545 C - Series circuit breaker is easy. First, make sure your power is off. Then, mount it securely using the #6 - 32 stainless - steel mounting screws and follow the specified torque of 6 in - lb (0.68 Nm). Connect the wires to the 1/4 - 20 tin - plated brass terminal studs, tightening them to 35 in - lb (3.95 Nm). Once installed, turn the power on. The flat rocker actuator is flush when the breaker is 'ON', so you don't have to worry about accidental switching. The colored actuator will clearly show when it's 'OFF'. Remember, this breaker offers overcurrent protection for things like inverters, bow thrusters, and windlasses. It's also 'trip free', which means it can't be forced closed after tripping. This is a safety feature to protect your equipment. This breaker is ignition - protected and safe for installation on gasoline - powered boats, but be aware that it can expose you to certain chemicals. Check P65Warnings.ca.gov for more information. For maintenance, keep it clean and check for any signs of wear or damage regularly. It can operate in temperatures from - 40°C to 85°C, but try to keep it within a normal range for better performance. With 10000 switching cycles, it should last a long time if used properly.