Blue Sea 5052 ST CLB Circuit Breaker Block - 6 Position w/Negative Bus [5052]

6 - Position ST CLB Circuit Breaker Block with Negative Bus

Features

• Quick - connect clips make it a breeze to install circuit breakers.
• Tin - plated copper busses and screw terminals ensure reliable connections.
• The clear insulating cover has square label recesses and meets ABYC/USCG insulation standards.
• The clip - on cover is easy to open for convenient access.
• Breakouts provide wire access from two directions.
• It can accept ring terminals.
• You can optionally install push - button waterproof boots or dress nuts over the cover.

Specifications:
Circuits: 6
Maximum Amperage: 100A (per block), 32A (per circuit)
Maximum Voltage: 32V DC
Mounting: #8 Screw (M4) or #8 Nut
Negative Bus: Yes
Source: Common Source
Minimum Operating Temperature: - 10°C
Maximum Operating Temperature: 60°C
Mounting Centers: 5.63' (143 mm)
Screw Terminal Type: #8 - 32 Screws with Captive Star Lock Washer
Height: 6.69' (169.93 mm)
Weight: 0.75lb (0.34 kg)

WARNING: This product can expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), which is known in California to cause cancer, birth defects or other reproductive harm. For more info, go to P65Warnings.ca.gov.

Specifications:

• Amperage: 100/32a
• Box Dimensions: 3'H x 5'W x 11'L, WT: 0.9 lbs
• UPC: 632085050528

Brochure (pdf)

Using this circuit breaker block is quite simple. First, use the quick - connect clips to snap the circuit breakers into place. Make sure to connect the wires to the tin - plated copper busses and screw terminals correctly. The clear insulating cover is easy to open when you need to access the breakers. You can install ring terminals for a proper connection. If you want extra protection, you can install the optional push - button waterproof boots or dress nuts over the cover. When it comes to mounting, use #8 screws (M4) or #8 nuts at the specified mounting centers. Keep in mind the operating temperature range from - 10°C to 60°C. Also, be aware of the warning about the chemicals in this product. For maintenance, regularly check the connections to ensure they are tight and free of corrosion. If you notice any issues, replace the faulty parts promptly.