BoatLIFE Git Rot Kit - 4oz [1063]

The 4oz Git Rot Kit is a unique two - part liquid epoxy. It penetrates the rot in wood, saturating it and restoring the original strength. It works well with loose rotted fibers. Remember, the wood must be dry. You can inject it into the wood, and it will soak in through capillary action. After mixing, it has a half - hour pot life and cures overnight. Once cured, it's sandable, paintable, and can be drilled and screwed. It's compatible with fiberglass resins, epoxies, and most sealants. This kit is perfect for fixing transoms, stringers, and cabin roof rot in both fiberglass and wood boats. Note: This product is for ground shipping only. WARNING: This product exposes you to chemicals like Di - n - butyl Phthalate, known in California to cause reproductive harm. For more info, visit P65Warnings.ca.gov.

Using the 4oz BoatLIFE Git Rot Kit is easy. First, make sure the wood you want to treat is dry. Then, inject the two - part liquid epoxy into the rotted area. It will soak into the wood on its own through capillary action. After you mix the two parts, you've got about half an hour to use it before it starts to set. Leave it overnight to cure. Once it's cured, you can sand it, paint it, drill holes in it, or screw into it. This kit is great for fiberglass and wood boats, especially for transoms, stringers, and cabin roof rot. Remember, it can only be shipped by ground. Also, be aware that it contains chemicals that can cause reproductive harm according to California law. Check P65Warnings.ca.gov for more details. For maintenance, keep the kit in a cool, dry place when not in use.