Attwood 90 P-Trap Fuel Tank Vent - Black w/Black Vent Head [1670-3]

Attwood 90° P-Trap Fuel Tank Vent - Black with Black Vent Head

This amazing Attwood 90-degree P-Trap fuel tank vent is a must - have for your marine needs. It effectively stops water from getting into the fuel tank, and at the same time, it lets air vent freely during normal sea conditions and washdowns. You won't need an anti - siphon loop in the vent hose because of its great performance. It requires a ¾ - inch installation hole and can work with a hull up to 9/16 inches thick.

Features:

• Standard 5/8 - inch I.D. hose mount
• Prevents water from entering the fuel tank
• Allows free air venting in normal sea and washdown conditions
• Meets ABYC standards

*Compatible with ethanol - blended fuels.

- cis2:mm1pm5ht -
Quick Guide (pdf)

Using the Attwood 90° P - Trap Fuel Tank Vent is easy. First, find a suitable spot on your boat for installation. Make sure there's a ¾ - inch hole available, as that's what this vent requires. The maximum hull thickness it can work with is 9/16 inches, so double - check your hull. Connect the vent to a 5/8 - inch I.D. hose. Once installed, it will start doing its job of keeping water out of the fuel tank and allowing air to vent. During normal sea conditions and when you're doing a washdown, it'll work perfectly. Remember, this vent is compatible with ethanol - blended fuels. For maintenance, check it regularly for any signs of blockage or damage. If you notice any issues, replace it right away. Also, keep in mind that it meets ABYC standards, so you can trust its quality.