Bennett Marine Fluid Reservoir [VP1139]

Fluid Reservoir

This amazing reservoir is designed to hold hydraulic pump fluid. It's a must - have for your hydraulic system!

How to Use:

• Regularly check the fluid level in the HPU.
• When the trim tabs are fully retracted, the fluid should be about 2' from the bottom of the reservoir (around 22 ounces). To refill, remove the Lexan cover and filler plug at the front left - hand corner of the reservoir.
• Fill it only with any type of automatic transmission fluid (ATF).
• Running the HPU with too much or too little fluid won't damage the trim tab system.

This product can't be returned to the original store. Contact the manufacturer directly for any problems.

This is a fluid reservoir from Bennett Marine that's used to hold hydraulic pump fluid. To use it, you need to check the fluid level in the HPU regularly. When the trim tabs are all the way in, make sure the fluid is about 2' from the bottom of the reservoir, which is around 22 ounces. If you need to add more fluid, just take off the Lexan cover and the filler plug at the front left - hand corner of the reservoir. Only use automatic transmission fluid (ATF) to fill it. Don't worry if there's a bit too much or too little fluid; it won't hurt the trim tab system. If you have any issues with the product, don't return it to where you bought it. Instead, get in touch with the manufacturer directly.