Airmar TM275C-LHW Transducer With Bare Wire MMC

The Airmar TM275C-LHW is a top - notch transom mount low/high wide CHIRP transducer with a bare wire mix - n - match cable. Model: TM275C - LHW - 0. It features a depth and fast - response water - temperature sensor. With low CHIRPS from 42 kHz to 65 kHz and a 25° to 16° beamwidth, and high CHIRPS from 150 kHz to 250 kHz with a constant 25° beamwidth, it offers 123 kHz of total bandwidth from a single transducer. It covers popular fishing frequencies like 50 and 200 kHz and everything in between. Airmar's new wide beam Chirp product line gives you more coverage under the boat. These transducers are broadband at their best, with a high - frequency range of 150 - 250 kHz and a constant 25° beamwidth. They not only improve the performance of Chirp - ready echosounders but also double the coverage under the boat compared to current high - frequency Chirp transducers. The new high - frequency transducers have a constant 25° beamwidth across the frequency band. This provides vast bottom coverage, precise fish detection in the upper water column, and creates crisper and larger return images on the display. Specifications: Hull deadrise up to 28°, Acoustic window is Urethane. What's in the box: TM - 275C LHW, Transom Mount Bracket and Hardware, 3 - 3deg Shims, MMC - 0 Cable.

Using the Airmar TM275C - LHW transducer is easy. First, use the transom mount bracket and hardware provided in the box to install the transducer on your boat. Make sure to adjust it according to your hull deadrise, which can be up to 28°. If needed, use the 3 - 3deg shims for a better fit. The cable is a bare wire mix - n - match cable that you can connect properly to your equipment. When it comes to operation, it will start detecting the depth and water temperature right away. The transducer works well with Chirp - ready echosounders, enhancing their performance. For best results, keep the acoustic window, which is made of urethane, clean. You can use a soft cloth to wipe it gently. Avoid using harsh chemicals that might damage the urethane. Also, store the transducer in a dry place when not in use to prevent any moisture - related damage. This will help keep your transducer working great for a long time.