Airmar TM185C Transducer Medium CHIRP With Humminbird 9-Pin

The Airmar TM185C Medium CHIRP Transducer is a top - notch choice for fishing enthusiasts. Model: TM185C - M. It comes with a depth and fast - response water - temperature sensor. With 1 kW power, it can reach a maximum depth of 457 m (1,500'). The medium frequency ranges from 85 to 135 kHz, offering a total bandwidth of 50 kHz from one transducer. It covers popular fishing frequencies like 88 and 107 kHz, providing excellent performance from shallow to mid - depth waters, great bottom detail, and clear fish - target separation. This transom - mount transducer has a urethane housing and a stainless - steel bracket, suitable for outboard and I/O powered boats. There are also thru - hull (B285M, B175M) and in - hull (M135M) models available. It features exclusive Xducer ID® technology. The TM185M is perfect for offshore and freshwater fishing in shallow to mid - range depths. Operating at 85 - 135 kHz, it can detect fish down to 457 m (1,500') with ultra - clear target resolution. Specifications: Weight is 4.16 kg (9.17 lb), it can accommodate transom angles from 3° to 21°, and the acoustic window is urethane. What's in the box: TM185C - M - MM and MMC - HB.

Using the Airmar TM185C Transducer is quite straightforward. First, decide if you're going to use the transom - mount option or choose a thru - hull or in - hull model. If it's transom - mount, install the transducer on your outboard or I/O powered boat using the stainless - steel bracket. Make sure the transom angle is between 3° and 21°. Once installed, connect it properly according to the instructions. When you're out fishing, the transducer will start working immediately to give you information about the depth and water temperature. It can detect fish at medium depths, which is great for different fishing scenarios. As for maintenance, keep the urethane acoustic window clean. You can use a soft cloth to wipe it gently. Avoid hitting the transducer against hard objects as it may damage the housing. Also, after each use, especially if you've been in saltwater, rinse it with fresh water to prevent corrosion. This will help keep your transducer in good working condition for a long time.