Airmar B75C-0-H 0d Tilt With Humminbird 14-Pin MM Cab

The Airmar B75C is a high - performance CHIRP bronze thru - hull transducer with a 0° tilted element and a 14 - Pin Humminbird Mix - N - Match Cable. Model: B75C - 0 - H - 14HB. It features a depth and fast - response water - temperature sensor. With just one transducer, you get 80 kHz of total bandwidth, covering the popular 200 kHz fishing frequency and more. It also uses the exclusive Xducer ID® technology. Ideal for commercial fishermen, charter captains, and tournament anglers, this broadband transducer offers amazing bottom detection down to 3,000m (10,000’), with 5 to 10 times greater detail. You can easily tell apart baitfish, game fish, and underwater structures. One installation saves you time and money. It's highly sensitive to small targets and shows crisp, high - resolution images on the echosounder screen. Specifications: CHIRP Frequency: 130 kHz to 210 kHz; Beamwidth: 15° to 9°; Element tilt: 0°; Deadrise: 0° to 7°; Maximum depth: 700ft. What's in the box: B75C - 0 - H - MM and MMC - 14HB.

Using the Airmar B75C transducer is quite straightforward. First, install it according to the provided instructions. Make sure to place it in a suitable location on your boat. Once installed, connect the 14 - Pin Humminbird Mix - N - Match Cable to your echosounder. When you're out fishing, turn on your echosounder, and the transducer will start sending and receiving signals. You'll see detailed information about the underwater world on the screen. As for maintenance, keep the transducer clean. After each use, rinse it with fresh water to remove salt, dirt, and debris. Check the cable regularly for any signs of damage. If you notice any cuts or frays, replace the cable immediately. Also, store the transducer in a dry place when not in use. Avoid hitting or dropping the transducer, as this can damage its internal components. By following these simple steps, your Airmar B75C will serve you well for many fishing trips.