Airmar B175C-0-H 0d Tilt With Humminbird 7-Pin MM Cabl

The Airmar B175C-0-H is a high - performance CHIRP transducer with a Humminbird 9 - Pin Mix - N - Match cable. Model B175C - 0 - H - HB is a great choice for boats 8 meters (25 feet) and above. It combines a depth and fast - response water - temperature sensor. With high - CHIRP frequencies from 150 kHz to 210 kHz, it offers 80 kHz of total bandwidth from a single transducer, covering the popular 200 kHz fishing frequency. Suitable for fiberglass or wood hulls, its ceramic elements are permanently tilted inside the housing to compensate for hull deadrise, aiming the beam straight down for maximum echo returns and no need for a fairing. Flush/tilted transducers can be mounted through a hole in fiberglass, metal or wooden hulls. High frequencies provide greater detail, perfect for shallower water and anglers fishing at depths less than 1500 feet. Specifications include a deadrise of 0° to 7°, a urethane acoustic window, 1 kW power rating at 1% duty cycle, a frequency range of 130 to 210 kHz - A (Broadband), a 10° to 6° beam, and a max depth of 1000 feet. The package includes a B175C - 0 - H - MM transducer and an MMC - HB Mix and Match cable.

Using the Airmar B175C - 0 - H transducer is quite straightforward. First, choose a suitable location on your boat's hull. It can be installed in fiberglass, metal or wooden hulls. Drill a hole and mount the transducer so that the outside of the fitting is flush against the exterior hull surface. Connect the Humminbird 9 - Pin Mix - N - Match cable to your sonar device. When using, keep in mind that it's best for boats 8 meters or longer. For shallower waters and fishing less than 1500 feet deep, you'll get the most detailed information. As for maintenance, regularly check the cable for any signs of wear or damage. Clean the transducer with a mild detergent and water to keep the acoustic window clear. Also, make sure to store it in a dry place when not in use to prevent corrosion and damage to the internal components.