Airmar CM599LH 1-3kW Pocket Mounted Transducer - No Connector [CM599C-LH]

Using the right tool simplifies work and boosts results. For reaching the deep - water habitats of swordfish, tuna, and other species, a 2 to 3 kW, dual - frequency transducer like the Chirp - ready CM599LH is ideal. It offers deep - water performance down to 3000 m (10000') with low - frequency and high - resolution imaging from the high - frequency band. The CM599LH features a twenty - four - element, low - frequency array working between 28 and 60 kHz. Its single high - frequency ceramic operates from 130 to 210 kHz with a narrow 8° to 4° beamwidth. **Key Features:** - Sense depth and water temperature quickly. - 2 to 3 kW power for great deep - water performance. - Low frequency range: 28 to 60 kHz. - Port - starboard beamwidth: 23° to 9°. - Fore - aft beamwidth: 11° to 5°. - Max low - frequency depth: 3048 m (10000'). - High frequency range: 130 to 210 kHz. - Beamwidth: 8° to 4°. - Max high - frequency depth: 457 m (1500'). - Total bandwidth of 112 kHz from one transducer. - Covers popular fishing frequencies like 50 and 200 kHz. - Resin housing with curved - edge for wet - box installation. - Can be installed in a cavity or welded tank. - Available in thru - hull external (R509LH) and in - hull (R599LH) mounts. - Patented Xducer ID® technology. **Specifications:** - Frequency Band: Low - High - Functions: Depth, Temperature - Material: Urethane - Mounting Style: Tank, Cavity, Pocket/Keel Mount - Connector: Bare Wire - Display Connector: 0 - Hull Material: Fiberglass or metal - Max Vessel LOA: 8 m (25') and above - High Frequency: 130 - 210 kHz - Common Use: Fishing, Commercial Fishing - Max Deadrise Angle: Any - Tilted Element: No - Low Frequency Beamwidth: 11°x23° - 5°x9° - Low Frequency: 28 - 60 kHz - High Frequency Beamwidth: 8° - 4° - Max Deadrise: Can handle any deadrise angle with custom installation - Power Rating: 2 - 3 kW - Single or Dual Frequency: CHIRP - Ready Dual - Band - Country of Origin: USA - Cable - Length: 15 m (49') - Weight: 14.2 kg (31.2 lb.) - Max Depth: Low frequency - 3048 m (10000'), High frequency - 457 m (1500') This product can't be returned to the original purchase point. Contact the manufacturer directly for any issues.

Using the Airmar CM599LH Transducer is quite straightforward. First, decide on the installation method - whether it's in a cavity, a welded tank, or you can choose the thru - hull external or in - hull mounts. Make sure the hull material is either fiberglass or metal as recommended. When using it for fishing, just turn it on and let it start sensing the depth and water temperature. You can rely on its wide frequency bands, the low frequency for deep - water exploration and the high frequency for high - resolution imaging. Here are some important notes. This product can't be returned to where you bought it, so if there are any problems, get in touch with the manufacturer right away. Also, the maximum vessel length should be 8 m (25') or above. For maintenance, keep the transducer clean. Check the cable regularly for any signs of damage, and since it has a resin housing, avoid exposing it to harsh chemicals. If you're using it in different deadrise angles, custom installation might be needed to ensure optimal performance. With proper use and care, this transducer will serve you well in your fishing and commercial fishing activities.