Attwood Quick-Release Transom Tie-Down Straps 2 x 4 Pair [15232-7]

Quick-Release Transom Tie-Down Straps 2' x 4' Pair are essential for safely securing your boat to the trailer. When attached to transom eyes and the trailer, these straps minimize vertical and lateral movement and reduce boat bouncing on trailer pads or rollers. With a width of 2 inches, they're suitable for larger boats. The strong webbing resists rot, oils, gasoline, and most chemicals. The Quick-Release (Over-Center) buckle is not only strong and secure but also easy to use. You can quickly tighten it and cinch it tight by depressing the buckle handle, and release it by lifting the handle. The vinyl-coated S-Hook prevents scratching the boat or trailer finish and is corrosion-resistant. There's a protective pad behind the buckle to avoid marring gel coat and painted surfaces, and a Hook-N-Loop closure keeps the buckle handle locked. Specifications include a 2-inch diameter, 4-foot length, box dimensions of 4'H x 6'W x 8'L, a weight of 1.75 lbs, and UPC 022697152329. Quick Guide (pdf).

Using these transom tie - down straps is easy. First, find the transom eyes on your boat and the appropriate attachment points on the trailer. Then, hook the vinyl - coated S - hooks onto the transom eyes and the trailer. Use the Quick - Release (Over - Center) buckle to tighten the strap. Just depress the buckle handle to cinch it tight. For release, simply lift the buckle handle. When using, make sure the straps are properly tightened to prevent any movement of the boat. Check the Hook - N - Loop closure to ensure the buckle handle stays locked. To maintain these straps, clean them regularly with mild soap and water. Keep them away from sharp objects that could cut the webbing. Store them in a dry place to prevent rot. If the vinyl coating on the hooks shows signs of wear, consider replacing the hooks to avoid scratching your boat or trailer.