Airmar NMEA2000 Cable - 10M [WS2-C10]

This 10 - meter Airmar NMEA2000 cable is a great choice for your weather station. WeatherStation cables come in four types: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. Each cable has a round white connector at one end that fits the weather station base. The NMEA 2000 cable features a standard male 5 - Pin NMEA 2000 connector. If it's over 6 meters long, it has a built - in termination resistor for use as a network backbone extension. The NMEA 0183 cable ends with an Airmar 8 - Pin connector (CX - 128), removable if needed. The combined cable has an Airmar 8 - Pin connector and comes with an Airmar splitter box having NMEA 0183 and NMEA 2000 output ports. The Furuno cable has a 7 - Pin Furuno connector for Furuno NMEA 0183 equipment. This cable offers only NMEA 2000 output. Note that this product can't be returned to the place of purchase. Contact the manufacturer directly for any issues.

Using this Airmar NMEA2000 cable is easy. First, identify the type of cable you need based on your weather station's requirements. Connect the round white connector at one end to the base of your weather station. If it's an NMEA 2000 cable, plug the standard male 5 - Pin connector into the appropriate device. For NMEA 0183 cables, connect the Airmar 8 - Pin connector. You can remove it if necessary. When using the combined cable, attach the Airmar 8 - Pin connector and use the splitter box for different outputs. Furuno cables should be plugged into Furuno NMEA 0183 equipment. Remember, this product can't be returned to the place of purchase. If you face any problems, contact the manufacturer right away. To keep your cable in good condition, avoid bending it too sharply and keep it away from extreme temperatures and moisture.