Airmar B75C-12-L 12d Tilt Low CHIRP Raymarine 11-pin Cable

The Airmar B75C-12-L 12d Tilt Low CHIRP Transducer paired with a Raymarine 11-Pin Mix-N-Match Cable is a great choice for boaters. Model B75C-12-L-11R offers a depth and fast - response water - temperature sensor. It operates on a low - CHIRP frequency from 40 kHz to 75 kHz, with a 32° to 21° beamwidth. With 300 W of power, it can reach a maximum depth of 353 m (1200'), delivering excellent deep - water performance. Its low - profile, thru - hull housing ensures good display resolution at high speeds when installed correctly. Ideal for stepped, planing, or displacement hulls, it has a bronze housing for use in fiberglass or wood hulls. The low - frequency band between 40 and 75 kHz provides great coverage and tracking. Installed almost flush to the hull, the element tilt corrects for hull deadrise, ensuring accurate depth readings. It offers a greater depth range, wider beamwidth, and more coverage under the boat. The Chirp signal processing technology gives more detail at greater depths and is less affected by noise. It's also perfect for high - speed boat operation. Specifications: Cable length is 9 m (30'), deadrise range is 8 to 16°, frequency band is low, low frequency is 40 - 75 kHz, low - frequency beamwidth is 32° - 21°, max depth is 366 m (1200'), power rating is 300 W, no retractable housing, it's a CHIRP - Ready Single - Band, and transducer functions are depth and temperature. In the box: B75C - 12 - L - MM and MMC - 11RLDB Cable.

Using your Airmar B75C - 12 - L transducer is easy. First, make sure to install it almost flush to the hull. The tilt of the element will correct for the hull deadrise, so your depth readings will be accurate. When you're out on the water, the transducer will measure the depth and water temperature for you. Remember, it works best at high boat speeds too. For maintenance, keep the transducer clean. After each use, rinse it with fresh water to remove any salt or debris. Avoid hitting it against hard objects as this could damage it. If you notice any issues with the depth or temperature readings, check the connection of the Raymarine 11 - Pin cable. It's also a good idea to store the transducer in a dry place when not in use. With proper use and care, your Airmar B75C - 12 - L will serve you well for a long time.