Blue Sea 7548 C-Series Flat Rocker Circuit Breaker - Single Pole - 80A [7548]

Blue Sea C-Series 80A Single Pole Flat Rocker Circuit Breaker

Features:
The rocker actuator stays flush when 'ON', preventing accidental switching. Its colored actuator clearly shows the 'OFF' position. This breaker offers overcurrent protection for inverters, bow thrusters, and windlasses. It combines switching and circuit protection in one device. It's 'Trip Free', meaning it can't be forced closed after tripping. It's ignition protected, making it safe for gasoline - powered boats.

Specifications:
Amperage: 80A AC / 80A DC. Actuator style is flat rocker. It has 1 pole. The maximum voltage is 240V AC / 48V DC. It's a magnetic hydraulic, trip - free circuit breaker. Terminal stud torque is 35 in - lb (3.95 Nm). Interrupt capacity is 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC. The minimum operating temperature is - 40°C and the maximum is 85°C. The mounting screw is #6 - 32 stainless steel with a torque of 6 in - lb (0.68 Nm). It has 10000 switching cycles. The terminal stud is 1/4 - 20 tin - plated brass, and it weighs 0.38lb (0.17 kg).

WARNING: This product can expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), known in California to cause cancer, birth defects or other reproductive harm. For more info, go to P65Warnings.ca.gov.

More Specs:
Amperage: 80a. Box dimensions are 2'H x 3'W x 5'L and it weighs 0.4 lbs. UPC: 632085075484

Using this Blue Sea circuit breaker is easy. First, make sure the power is off before installation. Mount it securely using the #6 - 32 stainless steel screws and tighten them to the recommended 6 in - lb (0.68 Nm) torque. Connect your electrical components to the 1/4 - 20 tin - plated brass terminal studs, tightening them to 35 in - lb (3.95 Nm). When in use, the flat rocker actuator will be flush when the breaker is 'ON'. If there's an overcurrent situation, the breaker will trip automatically and can't be forced closed. To reset it, turn it to the 'OFF' position and then back to 'ON'. Remember, this breaker is designed for specific voltage and amperage limits (80A AC / 80A DC, 240V AC / 48V DC). Don't use it outside these specifications. Also, be aware that it can expose you to harmful chemicals. Keep it in an environment between - 40°C and 85°C. For long - term use, check the screws periodically to ensure they're tight and the actuator moves freely. If you notice any issues like excessive heat or abnormal tripping, stop using it and have it inspected.