Egis Programmable Automatic Charging Relay (ACR) 160A, 12V [7610]

160A, 12V Programmable Automatic Charging Relay

This amazing Egis 160A charging relay is both automatic and programmable. It solves the problem of dead start batteries by sharing the charge between two batteries and isolating them when there's no charge source. It's a must - have for reliable battery charging.

Applications:

• It supports multiple engines or independent charge systems. With two independent start or engine isolation inputs, it isolates charge sources when both are active, giving you the best charging performance.
• It protects your electrical system from cascading faults. There's an optional lock - out that stops it from closing if one terminal is connected to a battery with a shorted cell.

Features:

• Ultra - low power draw! Compared to typical ACRs (7 - 10 mA), the 7610 ACR only uses 1.3 mA. It won't drain your batteries even after long periods of electrical system downtime.
• Installation is a breeze! The integrated sealed plug prevents corrosion and comes with a Deutsch/Amphenol DTM connector harness.
• There's a start assist input option. You can manually connect the batteries via a remote switch to get maximum cranking amps.
• It's built like a tank! A sealed unit, stainless steel hardware, and high - temperature materials allow you to mount it anywhere. It also has integrated thermal overload shutdown protection.
• There's an additional low - amp output. You can use it to remotely report device status or drive a secondary relay for charging a battery bank without a charge source.

Specifications:

• Continuous Current: 160 Amps
• Voltage Range: 8 - 18 VDC
• Off - State Current Draw: 1.3 mA
• Interrupt Current: 240 Amps
• ACR Closing Voltage: 12.9 - 13.6 VDC
• ACR Opening Voltage: 12.1 - 12.8 VDC

Focal Features:

Top Side Dip Switches

After mounting, you can easily access these to program voltage settings and set active features. They're protected by a self - retained cover.

Stainless Steel Self - Locking Hardware

It's made of 100% non - ferrous corrosion - resistant materials. All the attachment screws and nuts are self - locking.

Integral I/O Connector

The sealed Molex MX - 150 connector stops corrosion and keeps it from vibrating loose, unlike the 1/4' quick connect terminals on other products.

Connection Options

Comes with a Deutsch DT/AT style connector harness as standard. You get three connection options (MX - 150, DT/AT, and wire leads).

Easy Integration with RT Fuse Blocks (24 HR Circuits)

Optional EasyLink bus bars save space and cost when connecting TH Series relays with RT Series Fuse Blocks.

LED Diagnostics

It shows you relay ON/OFF status, under voltage, over voltage/temp, start isolation/assist, and output on/off status.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Lockable: Yes
• Box Dimensions: 3'H x 4'W x 8'L, Weight: 0.85 lbs
• UPC: 850035199633

Quick Guide (pdf)

Using the Egis 160A, 12V Programmable Automatic Charging Relay is easy. First, decide on the best location to mount it. You can mount it anywhere because of its bullet - proof construction with a sealed unit, stainless steel hardware, and high - temperature materials. When installing, use the integrated sealed plug which comes with a Deutsch/Amphenol DTM connector harness to avoid corrosion. There are three connection options available, so choose the one that suits your needs best. Once it's mounted, you can access the top - side dip switches to program the voltage settings and determine the active features. The switches are protected by a self - retained cover. For the start assist function, you can connect the batteries manually via a remote switch when you need maximum cranking amps. As for maintenance, the ultra - low power draw of 1.3 mA means it won't drain your batteries during long periods of inactivity. But it's a good idea to check the LED diagnostics regularly. It will show you important statuses like relay ON/OFF, under voltage, over voltage/temp, start isolation/assist, and output on/off. If one terminal is connected to a battery with a shorted cell, the optional lock - out feature will stop the relay from closing to protect your electrical system. Also, be aware that this product can expose you to chemicals that may cause health issues according to California regulations. For more details, check P65Warnings.ca.gov.