BEP Easy Fit Battery Switch - 275A Continuous [700]

The BEP Easy Fit Battery Switch is a game - changer for marine installations. It's designed for situations where switches need to fit through panels of different thicknesses. With an easily removable threaded ring, it can handle panel thicknesses up to 3/4' (19 mm). This switch shares features with the 701, including a removable key that goes 45 degrees past the off position, a labeled handle, and a removable back cover for exposed terminals, meeting ABYC specs. It can be surface - mounted, offering a unique look compared to other market switches. BEP Marine Battery Switch is tested according to UL 1107 for continuous (1 hour), intermittent (5 minutes), and cranking (engine starting - 10 seconds) currents. The test checks the max current the switch can handle without rear terminals getting more than 100 deg C (212 deg F) above ambient temperature. Continuous and intermittent ratings are tested at 110% of specified ratings, and all BEP switches are independently tested by a 3rd - party lab. Key features include easy retro - fitting in place of most European post and lever type switches, being molded in high - temperature, fiber - reinforced plastics, having tin - plated copper studs and nuts, and being ignition - protected. WARNING: This product may expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), known in California to cause cancer, birth defects, or other reproductive harm. Check P65Warnings.ca.gov for more info.

Using the BEP Easy Fit Battery Switch is straightforward. First, decide whether you want to recess - mount it through the panel or surface - mount it. If recess - mounting, use the removable threaded ring to adjust for panel thickness up to 3/4' (19 mm). When installing, make sure to connect the terminals correctly. The switch has a removable key that can be turned 45 degrees past the off position. Just turn it to the desired position and operate your marine equipment. As for maintenance, keep the switch clean. Wipe it down regularly to prevent dust and debris build - up. Check the tin - plated copper studs and nuts for any signs of corrosion. If you notice any, clean them gently. Remember, this product contains chemicals that can be harmful, so always handle it with care. If you have any concerns about the chemicals, refer to P65Warnings.ca.gov.