Airmar SS175C-0-L 0d Tilt Low CHIRP With Raymarine 11-Pin

The Airmar SS175C-0-L 0d Tilt transducer with Low CHIRP and Raymarine 11-Pin is a top - choice for smaller boats like center consoles. It's a depth and fast - response water - temperature sensor with 1 kW power. The low - frequency range from 40 kHz to 60 kHz offers great deep - water performance, reaching a maximum depth of 762 m (2500') with a 32° to 21° beamwidth. This high - performance, low - profile thru - hull housing gives good resolution at speed when installed correctly. Its stainless - steel housing suits stepped, planing or displacement hulls made of fiberglass, wood or metal. Recommended for boats up to 11 m (36'). There's also a bronze housing (B175L) option for fiberglass and wood hulls. The exclusive Xducer ID® technology adds extra value. Tilted element design ensures accurate depth readings by orienting the beam directly down. Specifications include a weight of 2.7 kg (6 lb), hull deadrise up to 24°, urethane acoustic window, 98 mm (3 - 7/8') hole size, and seven internal broadband ceramic assemblies.

Using the Airmar SS175C - 0 - L transducer is quite straightforward. First, make sure to install it almost flush to the hull. The tilted element is already set at a 0° angle to correct for hull deadrise, but double - check the orientation so the beam points straight down. This will help get the most accurate depth readings. When it comes to maintenance, keep the transducer clean. You can use a soft cloth to wipe off any dirt or debris. Avoid using abrasive materials as they might damage the urethane acoustic window. Also, check the connections regularly to ensure they're tight and free of corrosion. If you notice any issues with the depth or temperature readings, first check the installation and connections. And remember, this transducer is designed for boats up to 11 m (36'), so don't use it on larger vessels as it might not perform as well.