Airmar B285C-HW Thru-Hull With Humminbird 9-Pin Mix-N-Ma

The Airmar B285C High Wide 1Kw CHIRP Bronze Thru Hull transducer comes with a Humminbird 9-Pin Mix-N-Match Cable. Model: B285C-HW-HB. It can measure depth and temperature and has a bronze housing. It uses the exclusive Xducer ID® technology. Airmar's wide beam Chirp product line offers more coverage under the boat. With a high frequency range of 150 - 250 kHz and a constant 25° Beamwidth, these transducers are broadband at its best. They improve the performance of Chirp - ready echosounders. Anglers using single - band, wide beam transducers get twice the coverage under the boat compared to current high - frequency Chirp transducers. The high - frequency transducers have a constant 25° Beamwidth across the entire frequency band. They provide vast bottom coverage and precise fish detection in the upper water column. The new wide beam format also creates crisper and larger return images on the display. Specifications: CHIRP Frequency: 150 - 250kHz; Beam width: Constant 25°; Maximum depth: 500'. What's in the box: B285C, High Speed Fairing Block, MMC - HB.

Using this Airmar transducer is easy. First, install the B285C in the boat following the instructions that come with it. Connect it to your Humminbird device using the 9 - pin cable. When you're out on the water, turn on your device, and the transducer will start measuring depth and temperature. For best results, make sure the transducer is properly aligned in the water. As for maintenance, keep the bronze housing clean. You can use a mild soap and water to clean it after each use. Avoid using abrasive materials that could scratch the housing. Check the cable regularly for any signs of wear or damage. If you're going to store the transducer for a long time, keep it in a dry place. Also, be careful not to expose it to extreme temperatures. With proper use and care, this transducer will serve you well for a long time.