Airmar B175C-12-HW 12d Tilt With No Connector MM Cable

The Airmar B175 is a top - notch wide - beam Chirp high - frequency transducer with a 12d tilted element and a bare - wire mix - n - match cable. Model B175C - 12 - HW - 0. It serves as a depth and fast - response water - temperature sensor. With a high CHIRP range from 150 kHz to 250 kHz, it has a constant 25° beamwidth and 100 kHz of total bandwidth from a single transducer. It covers the popular 200 kHz fishing frequency and the rest of the bandwidth. Ideal for fiberglass or wood hulls on boats 8 m (25’) and above. Airmar's new wide - beam Chirp line offers more coverage under the boat. Compared to current high - frequency Chirp transducers, anglers using this will get twice the coverage. The beam width is a constant 25° across the frequency band, providing great bottom coverage, precise fish detection in the upper water column, and creating clearer, larger return images on the display. Specifications: Deadrise 8° to 15°, Acoustic Window Urethane, Power rating 1 kW @ 1% duty cycle, Frequency 150 to 250 kHz - A (Broadband).

Using the Airmar B175 transducer is quite straightforward. First, make sure it's properly installed on your boat's hull, which should be fiberglass or wood and at least 8 meters long. The deadrise angle of your boat should be between 8° and 15°. Connect the bare - wire mix - n - match cable as per the instructions. When you're out on the water, it will start providing depth and water - temperature readings right away. The high - frequency range from 150 to 250 kHz gives you excellent fish detection and bottom coverage. For maintenance, keep the acoustic window (made of urethane) clean. Avoid hitting the transducer against hard objects. If you're not using it for a long time, store it in a dry place. Make sure to check the power rating (1 kW @ 1% duty cycle) to avoid overloading. That's all you need to know to get the most out of your Airmar B175 transducer.