Airmar B175C-0-H 0d Tilt With No Connector MM Cable

The Airmar B175C-0-H is a high-frequency CHIRP transducer with a 0° tilted element and a bare wire Mix-N-Match cable. Model B175C-0-H-0. It serves as a depth and fast-response water-temperature sensor. It offers high CHIRP frequencies from 150 kHz to 210 kHz, suitable for boats 8 m (25’) and above. With 80 kHz of total bandwidth from one transducer, it covers the popular 200 kHz fishing frequency and more. Ideal for fiberglass or wood hulls. The ceramic elements inside the housing are permanently tilted to compensate for hull deadrise, aiming the beam straight down for maximum echo returns and no need for a fairing. Flush/tilted transducers can be mounted through a hole in fiberglass, metal, or wooden hulls. High frequency means greater detail, perfect for shallower water and anglers fishing at depths less than 1500 feet. Specifications include a deadrise of 0° to 7°, a urethane acoustic window, a 1 kW power rating at 1% duty cycle, a frequency range of 130 to 210 kHz-A (Broadband), a 10° to 6° beam, and a max depth of 1000ft. The box includes a B175C-0-H-MM Transducer and an MMC-0 Mix and Match Cable.

Using the Airmar B175C-0-H transducer is quite straightforward. First, make sure your boat is at least 8 meters long and has a fiberglass or wood hull. Drill a hole in the hull according to the installation instructions and mount the transducer through it. Connect the Mix-N-Match cable. Once installed, it will start providing depth and water temperature information. Remember, this transducer is best for shallower waters less than 1500 feet. When it comes to maintenance, keep the acoustic window clean. You can use a soft cloth to wipe it gently. Also, check the cable regularly for any signs of wear or damage. If you notice any issues, replace the cable promptly. And don't forget that the deadrise angle of your boat should be between 0° and 7° for optimal performance.