Airmar Furuno 10-Pin Mix Match Cable f/600W Non-CHIRP Transducers [MM-10FUR]

This Furuno 10-Pin Mix & Match Cable is perfect for 600W Non-CHIRP Transducers. The 600W transducers come with a common base and a short (2m) cable, along with an 8m interchangeable brand-specific adapter cable. The short cable on the transducer has an Airmar 5-pin male connector, and the adapter cable has a matching 5-pin female connector at one end and the right connector for a specific electronics brand at the other. Both parts are essential for installation. If you change your equipment brand later, you can keep the transducer in place and just replace the adapter cable. Note that 600W Mix and Match cables can't be used with 1kw or CHIRP transducers. Features: 10-Pin, designed for Furuno 10-Pin equipment.

Using this cable is straightforward. First, make sure you have both the short cable attached to the transducer and the adapter cable. Connect the Airmar 5-pin male connector on the short cable to the matching 5-pin female connector on the adapter cable. Then, connect the other end of the adapter cable to your Furuno 10-Pin equipment. Remember, this cable is only for 600W Non-CHIRP transducers. Don't use it with 1kw or CHIRP transducers. For maintenance, keep the cable away from sharp objects to avoid cuts. If the cable gets dirty, you can gently wipe it with a dry cloth. If you change your equipment brand, you can leave the transducer in place and simply replace the adapter cable.