This Blue Sea push button LED ring switch is a top - notch choice. Model 4163 - BSS can handle 10A continuously. It can be wired for normally open or normally closed operations. Comes with.110 - inch quick connects in the retail package. The switch has an OFF - (ON) - Momentary One action. It's rated at 10A @ 12V DC Resistive and 3A @ 12V Inductive, with a nominal voltage of 12V DC. The maximum LED operating current is 20mA. It can operate from - 10°C to 70°C and be stored from - 55°C to 85°C. The illumination is independent with separate contacts for LED power. The max panel thickness it can handle is 0.31in (7.87 mm), and it has a ¾' (19mm) mounting hole. With 40,000 switching cycles and 5 - 0.110 - inch Quick Connect terminals, it's a reliable and versatile option.
Using this Blue Sea switch is easy. First, decide whether you want it wired for normally open or normally closed operation. Then, use the included.110 - inch quick connects to install it. Make sure the voltage of your system is 12V DC as specified. When it comes to the LED, don't exceed the 20mA maximum operating current. As for temperature, don't use it in conditions below - 10°C or above 70°C, and store it between - 55°C and 85°C. Keep the switch clean and dry. If you notice any problems, like a decrease in the number of switching cycles, it might be time to replace it. Overall, it's a simple and useful device for your electrical needs.
