The BEP 778-ANL2S is a top - notch 35 - 750A ANL fuse holder. Its radiused ends make cable routing a breeze. It's compatible with 5/16' (8mm) or 3/8' (10mm) ANL fuses. The high - temperature, fibre - reinforced plastic base gives it great strength and chemical resistance. A clear polycarbonate cover not only looks good but also has a fuse viewing 'window' for easy visual inspection. With modular sizing and a common interconnection height, it can be easily linked with other Pro Installer Busbars and Fuseholders, saving you both time and space during installation. Its compact design takes up less room. This fuse holder offers the best circuit protection for installers and end - users. Specifications: Cable connection is 10mm (3/8') studs, fuse mounting studs are 8mm (5/16'), it supports ANL or ANN fuses, amperage range depends on the 35 - 750A fuse, max voltage is 50vDC, and dimensions are 5.8' x 1.9' x 2.4'.
Using the BEP 778 - ANL2S fuse holder is easy. First, make sure to select the right ANL or ANN fuse within the 35 - 750A range according to your circuit's needs. Then, connect the cables to the 10mm (3/8') studs. Mount the fuse on the 8mm (5/16') studs. When installing, take advantage of its modular design to link it with other Pro Installer Busbars and Fuseholders. This will save you time and space. Remember, the maximum voltage it can handle is 50vDC, so don't exceed this limit. For maintenance, regularly check the fuse through the viewing 'window' in the cover. If the fuse is blown, replace it immediately. Keep the fuse holder in a dry place to prevent damage to the high - temperature, fibre - reinforced plastic base. Also, clean the cover with a soft cloth to maintain good visibility of the fuse.
