Airmar B75C 0° Tilted Medium CHIRP Bronze Thru Hull Transducer with Furuno 12-Pin Cable
Model: B75C-0-M-12F
- It's a depth and fast - response water - temperature sensor, giving you real - time data on your boat.
- With 600 W of power, it can reach a maximum depth of 274 m (900'), perfect for various water conditions.
- The medium frequency of 80 to 130 kHz offers good shallow - water performance, clear bottom details, and better deep - water results than high - frequency bands.
- It has a 24° to 16° beamwidth, ensuring wide coverage.
- The low - profile, thru - hull housing provides excellent display resolution at speed when installed correctly.
- The bronze housing is suitable for fiberglass or wood hulls, ensuring durability.
- Comes with patented Xducer ID® technology for reliable operation.
Airmar's low - profile, Chirp - ready transducer models are great for smaller boats like center consoles. The B75M operates from 80 to 130 kHz, delivering up to 50 kHz of total bandwidth in one installation. It shows amazing bottom details in shallow and medium depths down to 274 m (900').
When installed almost flush to the hull, the tilted element corrects for the hull deadrise, directing the beam straight down. This guarantees maximum echo returns and more accurate depth readings.
Specifications| Deadrise Range | 0° to 7° |
| Hole Size | 70 mm (2 - 13/16') |
| Housing Material | Bronze |
| Deadrise | 0° to 7° |
| Maximum depth | 900ft |
| Medium Frequency | 80 to 130 kHz |
What's in the Box:- B75C - 0 - M - MM
- MMC - 12F Cable
Using this Airmar B75C - 0 - M transducer is easy. First, make sure to install it almost flush to the hull. This will correct for the hull deadrise and direct the beam straight down for accurate depth readings. It's suitable for fiberglass or wood hulls, so you don't have to worry about compatibility. When using it, you'll get real - time depth and water - temperature data. Just turn it on and let it do its job. For maintenance, keep the transducer clean. Wipe it down regularly to remove any dirt or debris. Also, check the cable for any signs of wear and tear. The hole size for installation is 70 mm (2 - 13/16'), so ensure you have the right tools. The deadrise range is from 0° to 7°, so it can work well in different hull setups. With a maximum depth of 900ft, you can use it in a variety of water depths. Just enjoy exploring the underwater world with this great transducer.
