Attwood 316 Stainless Steel Alloy Flush Mount Fuel Vent - 90 Vent [66032-3]

This 316 stainless steel alloy flush mount fuel vent with a 90° angle stands out. It has a smooth exterior edge, unlike some competitors with protruding caps that can get damaged by hull bumps and scrapes. The cap can be easily unscrewed using a hex head wrench, which allows for simple filter cleaning and pressure testing of the whole fuel system. It comes with two silicone gaskets. Features include a 90-degree vent. Specifications are: hose size 5/8' inner diameter, maximum hull thickness 7/8', and installation hole size 1-3/8'.

Using this fuel vent is easy. First, make sure to choose a suitable location on the hull with a thickness of up to 7/8 inches and drill a 1 - 3/8 inch installation hole. Connect the 5/8 inch inner - diameter hose to the vent. When it comes to maintenance, regularly use a hex head wrench to unscrew the cap. Check and clean the filter to keep the fuel system working well. Be careful during installation and use to avoid hitting the vent on the hull to prevent damage. Store it in a dry place when not in use to prevent corrosion of the stainless - steel material. The included silicone gaskets help with a tight seal, so make sure they are properly placed during installation.