B&G Triton2 Autopilot Controller

The B&G Triton2 Autopilot Controller is a must - have for sailors. With a user - friendly seven - button keypad, it offers safe and reliable operation in all conditions. Combine it with the Triton2 Instrument display to get a fully - featured autopilot. It has B&G’s intelligent sail - specific functions for compass and wind steering, Smart Manoeuvre controls for easy tacking and gybing, and integrates with MFD/chart plotters for waypoint and route navigation. Power consumption is just 1.4 watts, and it has an IPx7 waterproof rating, can handle up to 95% humidity. The compass safe distance is 300mm, and it operates in temperatures from - 15 to +55°C (5 to +131°F). Comes with a Pilot Controller, 0.6m N2K Cable, N2K T - Joiner, Triton2 Pilot & OP12 Suncover, and Triton2 Pilot & OP12 Installation Kit.

Using the B&G Triton2 Autopilot Controller is easy. First, connect it to the Triton2 Instrument display as described in the installation kit. Once connected, you can start using the seven - button keypad to control your autopilot. For compass and wind steering, just use the relevant functions on the keypad. When you need to tack or gybe, the Smart Manoeuvre controls make it a breeze. You can also integrate it with your MFD or chart plotter for waypoint and route navigation. When it comes to maintenance, keep it clean and dry. Since it's IPx7 waterproof, it can handle some water exposure, but don't submerge it for long periods. Also, make sure to store it in a place with a temperature between - 30 to +70°C (- 22 to +158°F) to keep it in good condition. Check the compass safe distance to avoid interference. If you have any issues, refer to the detailed instructions in the installation kit.