Blue Sea 8068 DC 13 Position Toggle Branch Circuit Breaker Panel - White Switches [8068]

The Blue Sea 8068 DC 13 - Position Toggle Branch Circuit Breaker Panel is a top - notch electrical solution. It comes with white switches, adding a clean and modern look.

Features:

• All positive, negative and grounding buses are pre - installed and fully pre - wired, saving you time on installation.
• Comes with a set of 30 common DC labels to help you organize your circuits easily.
• Label backlighting is pre - installed, making it easy to read the labels in low - light conditions.
• All LEDs are installed for clear status indication.
• It includes detailed installation instructions and a cutout template for a hassle - free setup.
• Comes with an 8028, 8 - 16 Volt DC Micro Voltmeter and an 8041, 0 - 50 Amp DC Micro Ammeter for accurate monitoring.
• Equipped with 10 15A Single Pole Circuit Breakers for reliable circuit protection.

Specifications:

• 13 positions for multiple circuit connections.
• Nominal Voltage of 12v DC, suitable for many DC applications.
• Maximum Amperage of 50A for handling high - power loads.
• Height of 7.5', width of 10.5' and depth of 3' with a weight of 4.2 lbs, making it compact and easy to install.

Included:

• (10) 7210 A - Series White Toggle Circuit Breaker - Single Pole 15A
• (1) 8030 Basic DC Panel Label Set - 30 Labels
• (1) 8028 DC Micro Voltmeter - 8 to 16v DC (Meter)
• (1) 8041 DC Micro Ammeter - 0 to 50A w/ Shunt (Meter)

WARNING: This product can expose you to chemicals including di(2 - ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• AC/DC: DC
• Max Breaker Quantity: 13
• Voltage: 12v
• Box Dimensions: 5'H x 10'W x 13'L WT: 4.2 lbs
• UPC: 632085080686

Quick Guide (pdf)
Owner's Manual (pdf)

Using the Blue Sea 8068 DC 13 - Position Toggle Branch Circuit Breaker Panel is quite straightforward. First, follow the detailed installation instructions and use the cutout template to install it in the desired location. Make sure to connect all the positive, negative and grounding buses correctly as they are pre - wired. You can use the included set of 30 common DC labels to mark each circuit clearly. The label backlighting and installed LEDs will help you monitor the status of the circuits easily. The 8028 DC Micro Voltmeter and 8041 DC Micro Ammeter can be used to check the voltage and amperage. When it comes to maintenance, regularly check the circuit breakers for any signs of damage or overheating. If a circuit breaker trips, find the cause of the overload before resetting it. Also, keep in mind the warning about the chemicals in the product. If you live in California, refer to P65Warnings.ca.gov for more information.