Blue Sea Terminal Block 30A 4 Circuit

Blue Sea Systems Terminal Block 30A - 4 Circuit

Model: 2504 - BSS
It features a closed - back design that fully insulates power from the mounting surface. Each screw pair forms an isolated circuit, and jumpers can create common circuits.
Specifications

Circuits	4
Length	3.25in (82.55 mm)
Max Voltage	600V AC/DC
Continuous Rating	30A
Base Material	UL 94 V0, PC
Bus Material	Nickel - Plated Brass
Mounting Screw	#10 [M5]
Screw Material	Stainless Steel
Screw Terminal Torque	10 in - lb (1.13 Nm)
Terminal Screws	M4
Wire Terminal Size	#8 [M4]

Using this Blue Sea terminal block is easy. First, find a suitable mounting surface and use the #10 [M5] mounting screws to secure it. Then, connect your wires to the M4 terminal screws. Make sure to tighten the screws to a torque of 10 in - lb (1.13 Nm). You can use jumpers to create common circuits as needed. When using, always check that the voltage doesn't exceed 600V AC/DC and the current stays within the 30A continuous rating. For maintenance, keep it clean and dry. If you notice any damage to the UL 94 V0, PC base material or the nickel - plated brass bus material, replace the terminal block immediately. Also, check the stainless - steel screws regularly for tightness.