Blue Sea 7541 C-Series Flat Rocker Circuit Breaker - Single Pole - 10A [7541]

Blue Sea 7541 C-Series Flat Rocker Circuit Breaker - Single Pole, 10A

Features:
The rocker actuator sits flush when 'ON', preventing accidental switches. The colored actuator clearly shows the 'OFF' position. It offers overcurrent protection for inverters, bow thrusters, and windlasses. This breaker combines switching and circuit protection in one unit. It's 'Trip Free', so it can't stay closed after tripping. Also, it's ignition protected, making it safe for gasoline - powered boats.

Specifications:
Amperage: 10A AC / 10A DC. Actuator Style: Flat Rocker. One pole. Maximum Voltage: 240V AC / 48V DC. Circuit Breaker Type: Magnetic Hydraulic - trip free. Terminal Stud Torque: 35 in - lb (3.95 Nm). Interrupt Capacity: 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC. Minimum Operating Temperature: - 40°C. Maximum Operating Temperature: 85°C. Mounting Screw: #6 - 32 Stainless Steel. Mounting Screw Torque: 6 in - lb (0.68 Nm). Switching Cycles: 10000. Terminal Stud: 1/4 - 20 Tin - Plated Brass. Weight: 0.38lb (0.17 kg).

WARNING: This product exposes you to chemicals like di(2 - ethylhexyl)phthalate (DEHP), known in California to cause cancer, birth defects, or other reproductive harm. For more info, visit P65Warnings.ca.gov.

More Specs:
Amperage: 10A. Box Dimensions: 1'H x 1'W x 12'L, WT: 1 lbs. UPC: 632085075415

Using the Blue Sea 7541 C - Series Flat Rocker Circuit Breaker is easy. First, make sure the power is off before installation. Locate a suitable place for the breaker and use the #6 - 32 stainless - steel mounting screws. Tighten them to a torque of 6 in - lb (0.68 Nm). Connect the wires to the 1/4 - 20 tin - plated brass terminal studs, applying a torque of 35 in - lb (3.95 Nm). When using, you can tell the breaker's status by the position of the rocker actuator. The colored actuator shows it's 'OFF'. It provides overcurrent protection for your inverters, bow thrusters, and windlasses. Remember, this breaker is 'Trip Free', so it'll automatically cut off the current when needed. Also, it's safe for gasoline - powered boats because it's ignition protected. As for maintenance, check the breaker regularly for any signs of wear or damage. Keep it clean and dry. The breaker can operate between - 40°C and 85°C, so avoid using it in extreme temperatures outside this range. Be aware that this product contains chemicals that can cause health issues, so follow the California warning instructions.