Egis XD Series Single Flex 2 Relay-ACR - DTM Connector [8810-1600]

Egis XD Series Single Flex 2 Relay-ACR - DTM Connector

This top - notch Egis relay slashes mounting space and product weight by 35 - 75% with its advanced bi - stable solenoid design and multiple solenoid assemblies, replacing common electrical system layouts. It's expandable with link and cross - link busbars to other dual, triple, or single XD relays. Moreover, it supports 2 or 3 battery systems with standard busbar interconnect accessories.

Applications:

• An excellent replacement for legacy solenoids and remote battery switches, wire - for - wire compatible with Blue Sea ML products.
• Forward - facing input studs simplify large wire installation, and a protective cover with label recesses helps easy identification and prevents contact shorts.

Features:

• Bullet - proof build, sealed to IP67/IP6K9K, and high - temp electronics allow it to be mounted anywhere. It has stainless steel cable lug studs and large mounting holes for 1/4 - 20 / M6 hardware.
• Simple programmability via dip switches offers great flexibility for OEMs and installers.
• Plug - and - play with legacy competitor products, with single, dual, and triple relay options for pin compatibility with ML Series bi - stable relays.
• Consumes 90 - 95% less off - state current than competitors.

Specifications:

• Total Continuous Current Amps: 500
• Max Cranking Current (Amps): 1500
• Mechanical Switching Life: 1,000,000 cycles
• Voltage Range (VDC): 8 - 36
• Off - State Current Draw (mA): 1.3
• State Change Current: 5A @ 12 VDC; 3A @ 24 VDC

Focal Features:

Led Status Display

The front - facing LED indicator clearly shows device status, and the remote LED replicates it.

40 Circuit Label Sheet Included

Convenient recesses for the weatherproof label set make circuit and relay identification a snap. There are also blank labels for custom use.

Protective Cover Included

Shields terminal studs and cable terminal edges from shorts.

Integrated Vent

High - quality Gortex vents regulate internal pressure, preventing moisture entry and ensuring long product life in tough environments.

Stainless Hardware

Quality stainless steel studs and self - locking flanged nuts prevent corrosion.

Programmable

Use the dip switches under the protective cover. The easy - to - use guide on the reverse simplifies custom settings for various applications.

Smaller Footprint

XD relays offer high amp ratings in a compact package, minimizing installation space.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick Guide (pdf)

Using the Egis XD Series Single Flex 2 Relay-ACR DTM Connector is quite straightforward. First, identify a suitable mounting location. Thanks to its bullet - proof construction and high - temperature resistance, it can be installed almost anywhere. Make sure to use the 1/4 - 20 / M6 attachment hardware in the large mounting holes for a secure fit. Connect the large wires to the forward - facing input studs easily. The protective cover should be put in place to prevent any accidental shorts between terminal studs and cable terminal edges. For programming, open the protective cover and use the dip switches. Refer to the configuration guide on the reverse side to set it up according to your needs. The LED status display on the front will show you the device's status, and the remote LED replicates it. When it comes to identification, use the included 40 - circuit label sheet. You can use the blank labels for custom applications. As for maintenance, the integrated Gortex vent will regulate internal pressure and prevent moisture entry, so you don't have to worry much about that. However, periodically check the stainless steel hardware for any signs of loosening. Also, be aware that this product can expose you to harmful chemicals as stated in the warning, so take necessary precautions.