Egis Relay 12V, 75A w/Dual Diode [901643]

12V, 75A Relay with Dual Diode for Automotive Use

This 12V, 75-amp dual-diode relay is a top choice for automotive applications. Its bifurcated contacts boost long-term reliability and operating efficiency. The dual-diode design safeguards control circuits from flyback voltage, offering excellent circuit protection.

Applications:

• Bifurcated contacts cut down on contact bounce, increasing reliability. This allows the relay to switch electricity more efficiently, reducing heat and wear.
• Dual Diode circuit protection shields sensitive electrical systems from flyback voltage.
• With an intermittent amperage rating of 150 amps for up to 3 seconds, it's perfect for high-startup amp draw situations.
• Offset input/output terminals and an integrated navider design prevent accidental short circuits.
• It can withstand high temperatures up to 125°C/257°F, making it ideal for engine bays and low-ventilation areas.

Features:

• Sturdy automotive-grade construction with IP54 ingress protection and reinforced mounting tabs for secure installation.
• Dual mounting holes on both sides for easy installation using ¼-20”/M6 1.25 bolts or #14 screws.
• Made from high-quality materials for top performance and a 100,000 electrical switching cycle capacity.
• Enhanced vibration and shock protection ensures long service life and system reliability.

Specifications:

• Intermittent Current @ 3 SEC (Amps): 150
• Ambient Temp. Rating (Low/High) (Celsius): -50/125 C
• Max Continuous Current (Amps): 75 @23 degrees C
• Electrical Endurance Rating (Cycles): 100,000
• Initial Contact Resistance (6VDC) 50 mOhm
• Operating Voltage Range: 8.8-16VDC

Focal Features:

Long-Term Reliability

Built with high-quality materials, it offers excellent electrical switching for long-term use.

Locking Hardware

Zinc-plated M5-size terminal screws with nuts keep connections secure and easy to tighten.

Automotive Grade

Wide temperature range and shock/vibration resistance make it great for automotive systems, meeting or exceeding industry standards.

Varied Fastener Sizes

6mm x 8.7mm elongated holes fit different bolts and screws and allow for adjustment during installation.

Reinforced Mounting

Robust mounting tabs with gussets keep the relay firmly in place.

Compact Size

Its small footprint is perfect for tight installation spaces.

Flat Blade Connectors

Shielded dual 6.3 x.03 mm flat male terminals make control wire connections quick and secure.

Offset Terminals

The navider tab design and varied mounting height pads prevent accidental shorts.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Using this relay is straightforward. First, find a suitable location in your automotive electrical system, preferably in a place with low ventilation and high temperature, like the engine bay, as this relay can handle temperatures up to 125°C/257°F. Use the dual mounting holes on either side of the relay to secure it. You can use ¼ - 20”/M6 1.25 bolts or screws up to #14 size. The 6mm x 8.7mm elongated holes allow for some centering adjustment during installation. Connect the control wires using the shielded dual 6.3 x.03 mm flat male terminal connectors for a quick and secure connection. Make sure the operating voltage is within the range of 8.8 - 16VDC. When it comes to maintenance, there isn't much you need to do. Thanks to its enhanced vibration and shock protection, it's built to last. But do keep an eye on the connections. The zinc - plated M5 - size input/output terminal screws with held - in - place nuts keep connections secure, but over time, you may want to check if they need tightening. Also, be aware that this product can expose you to chemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov.